3rd Generation Flanged Hub Bearings
Bearing, flange, wheel studs and ABS encoder ring in one balanced unit. Bolts onto the knuckle or axle — no hydraulic press, no separate hub, no bearing preload to set.
Fewer labour hours per repair
The most common failure point in a hub replacement is installation, not the bearing itself. A Gen 3 unit removes the press work and the preload question, which is why repair chains standardise on it for front-axle jobs.
- Stud countOn request
- Stud threadOn request
- PCD rangeOn request
- Spline countOn request
- Flange diameterOn request
- Axial runoutOn request
- ABS typeMagnetic encoder ring, 48 / 96 pole
- SealingCassette seal, grease-for-life
- Warranty24 months or 50,000 km
- Install kitAxle nut + torque sheet included
MOQ 50 pcs per reference · Stud pattern and spline confirmed against your drawing before production
Reference range
| OE / SKU | Type | ABS / Sensor | Dimensions & Fitment | Datasheet |
|---|---|---|---|---|
| 4142034000 | Gen 3 flanged | Encoder / on request | On request | On request |
| 43550-0R090 | Gen 3 flanged | Encoder / on request | On request | On request |
| 43502-32080 | Gen 3 flanged | Encoder / on request | On request | On request |
| 43202-3RA0B | Gen 3 flanged | Encoder / on request | On request | On request |
* OE numbers shown for cross-reference only. Stud length and thread pitch are confirmed per order.
No press, no preload
Four or five bolts and one axle nut. Torque figures are printed on the leaflet in every box.
Balance checked
Each unit spin-tested for runout and noise; encoder signal verified on a bench rig.
EV-compatible options
Low-drag seal and high-temperature grease variants for hybrid and electric platforms.
What we need to quote
- OE number or competitor reference, and the vehicle model / year
- Stud pattern confirmation — a photo of the old unit's face is usually enough
- Target quantity per reference and destination port
Quotation
Check fitment before you order
Send a photo of the unit you replace and we will confirm stud pattern, spline and encoder type before quoting.